RYK Jiayi Intelligent, with over 10 years of experience in the linear module transmission industry, has a self owned factory area of 8000 square meters and more than 120 employees, including a senior R&D and design team of over 20 people. It has established and maintained long-term strategic partnerships with ...

Linear module, also known as single axis robotic arm, linear slide table, electric slide table, single axis robot, etc. Usually refers to a linear transmission mechanism that can achieve precise linear positioning and load transfer. In recent years, linear module manufacturers have grown rapidly. In the dazzling and un...

Can linear motors completely replace screw modules? In the past two years, with the rapid development of linear motors, there have been constant claims in the industry that linear motors will replace traditional ball screw modules. As someone who has been in the industry for more than ten years, let's analyze whether l...

Repeated positioning accuracy analysis of screw module and synchronous belt module: Linear module can be divided into ball screw and synchronous belt, steel belt, gear and rack drive according to the power driving method. Common driving methods include ball screw and synchronous belt. The module is driven by a ball scr...

Method for selecting the ratio of length to diameter (slenderness ratio) of ball screw. The slenderness ratio of the screw refers to the ratio of the length to the diameter of the screw, which is less than 60. If the safety ratio is above 60, the gravity sag of the ball screw will cause displacement, resulting in the i...

When selecting a linear motor, an important factor is thrust, and the magnitude of thrust is one of the important factors in our selection of linear motors. The thrust determines the load weight of the module, etc. The thrust of a linear motor is divided into rated thrust and maximum MAX thrust The thrust of the iron c...

As one of the five transmission modes (screw, linear motor, synchronous belt, steel strip), the gear and rack transmission module has the following characteristics: it can ensure a constant instantaneous transmission ratio, good transmission stability, accurate and reliable transmission motion servo, large transmission...

The screw drive module is one of the four common transmission methods (screw drive, belt drive, linear motor, rack drive). Compared with other transmission applications, the sliding table of the screw drive module has the following characteristics: transmission efficiency of over 90%, low temperature rise during use, h...

Factory inspection process for linear module slide table: 1. Smoothness test after assembly; 2. Is the fixed orientation and spacing of the body reasonable; 3. Whether the fixed hole size of the servo motor matches; 4. Is the fixed hole size specification correct for the linear sliding table module; 5. Whether the asse...